Nathan Gallardo

Sound Design || Music || Audio DIY || Game Dev

Resonator Guitar [Part 4]

I needed to block off the old sound hole in the guitar as I wanted to cut some new ones. So I traced the hole onto the bit of wood I’d removed for the sound well and cut out two circles, one slightly larger than the other. Once the new sound holes were cut, I glued the bigger circle onto the inside of the guitar for support, then the smaller one into the old soundhole.

PhotobucketPhotobucket

I clamped it and left it over night.

Photobucket

Now the thing was really started to look like what I’d imagined!


%d bloggers like this: